The Face Shield reduces the risk of drip-transmitted infections and minor mechanical injuries by shielding the face.
It can be used as a supplement to protective clothing and used alone or in combination with safety glasses or goggles.
Low visor weight of only 100g guarantees comfort of wearing.
The visor has a possibility of adjusting the distance from the face and the angle of the cover.
The product is compliant with the PN-EN 166:2005 standard and has the CE mark.
The dimensions of the shield are 330mm x 230mm.
The shield is 1mm thick.
Gently remove the protective foil from the visor shield. Avoiding dirt and scratches, place the holes in the visor shield at the height of the holes in the fastening strip and connect the two elements with the knobs. Then thread the tape through the holes in the fastening strip and adjust its length to the circumference of the head to ensure a stable hold for the visor. The position of protective visor cover can be adjusted individually by slightly unscrewing the fixing knobs and re-tightening them after reaching the desired position of the cover.
Cleaning and maintenance
Before cleaning the cover, unscrew it from the holder. The visor elements should be cleaned with alcohol-based cleaning agents. During cleaning one should avoid cleaning agents and materials which may cause scratching or tarnishing of the visor surface.
When cleaning the visor, one should remember about hygiene.
The content of the set
1. Face shield
2. Restraint strap
3. Two fixing knobs
4. Flexible tape
The manufacturer is not responsible for the consequences of using the product
not in accordance with the instructions and intended use.